First, the preparatory work

Before you start to replace the table, you need to do some preparatory work on the laser cutting machine. First of all, it is necessary to disconnect the power supply of the laser cutting machine and disassemble the relevant parts on the laser cutting machine according to the machine instructions. The specific preparation work varies according to different models, and can be operated by referring to the relevant machine instructions.

Second, remove the old workbench

Before removing the old workbench, check how the workbench is fixed. Under normal circumstances, the fixing methods of the table of the laser cutting machine are screw fixing, bayonet fixing and sucker adsorption fixing. During the operation, it is necessary to pay attention to whether the old table of the laser cutting machine is loose, and if so, it needs to be fixed. Care should also be taken when removing the old workbench to avoid damaging the machine.

Third, install the new workbench

There are several steps to take when installing a new workbench:

(1) Put the new workbench into the working area of the laser cutting machine, and fix the workbench with the laser cutting machine according to the machine instructions;

(2) Confirm that the position of the new workbench is correct, and that the workbench is horizontal and not tilted. If the table is tilted, it needs to be readjusted;

(3) Replace and adjust the workbench according to actual needs.

Fourth, precautions

1. When replacing the workbench, turn off the power supply of the laser cutting machine and take appropriate safety measures to avoid personal injury and damage to the laser cutting machine.

2. When performing laser cutting, it is necessary to ensure that the surface of the material on the work table is kept flat, otherwise the quality of laser cutting may be affected.

3. When replacing the workbench, pay attention to the fixing method of the laser cutting machine workbench to avoid loosening during use.

4. It is necessary to test after replacing the workbench to ensure the normal operation of the laser cutting machine.

This article introduces the exchange method of the laser cutting machine table, hoping to be helpful to you. If you have any problems during the operation, please consult the manufacturer or professional technical personnel in time.