Products

　　XB-3000-Ⅳ head cutting and flanging machine is used for flanging liquid tank heads and anti-wave plates. It uses a knife to cut the heads and does not affect the welding of aluminum alloys.

　　1. Equipment composition

　　1.1. One cutting host

　　1.2. One spinning machine

　　1.3. One set of equipment bed

　　1.4. One set of precision pulleys

　　1.5. Hydraulic system 1 set

　　1.6. One set of vacuum generation system

　　1.7. One set of electrical control box

　　2. Equipment structural characteristics and performance parameters

　　2.1. The maximum diameter of the workpiece that can be processed: ф3000mm

　　2.2. The minimum diameter of the workpiece that can be processed: ф1000mm

　　2.3. Edge height (plate thickness 5mm) ≥50mm

　　2.4. R made by the side wrench head (R arc inside the head): R20mm

　　2.5. The minimum R arc of the workpiece cross-section that can be processed is R300mm.

　　2.6. The thickness of the workpiece that can be processed:

　　Q235A: Maximum 8mm, minimum 3mm

　　16Mn, stainless steel: maximum 6mm, minimum 3mm

　　Aluminum and aluminum alloy: maximum 12mm, minimum 3mm

　　2.7. Spin speed of oval workpiece: 0～5000mm/min

　　2.8. Linear speed of edge cutting and edge spinning: 0m～4m/min

　　2.9. Equipment working system: 24 hours

　　2.10. The edge spinning machine uses double hydraulic pumps for power. The equipment is of high grade. The hydraulic power is flexible. The edge pulling force is strong at the small R arc. The edge spinning automatically slows down. The flatness after the head is rotated is good.

　　2.9. Equipment working system: 24 hours

　　2.10. The edge spinning machine uses double hydraulic pumps for power. The equipment is of high grade. The hydraulic power is flexible. The edge pulling force is strong at the small R arc. The edge spinning automatically slows down. The flatness after the head is rotated is good.

　　2.11. The throat depth of the cutting head is 700MM. There is no need to use plasma for edge trimming, which improves production efficiency and reduces production costs.

　　2.12. Use a vacuum suction cup to hold the workpiece for cutting and edge turning without scratching the workpiece.

　　2.13. Host overall dimensions (length x width x height): 4800mmX1300mmX1400mm

　　2.14. Applicable head shapes: round, oval, butterfly

　　2.15. The cutting and flanging of the head adopts hydraulic profiling, and the cutting and flanging are carried out along the edge of the template.

　　2.16. Total power of the whole machine: <13KW